Instructions
The Thinkcar THINKTPMS S2 433/315 MHz 2 in1 tire sensor covers more than 98% of vehicles, which is very cost-effective. Auto shops only need to stock 1 SKU to meet the needs of vehicle TPMS sensors, saving time and money, and improving the output ratio. The extraordinary sensor signal strength allows the S2-Sensor to be easily programmed wirelessly even when the pressure sensors have already been mounted to the wheel. In addition, the unique spiral release valve design makes it easier to replace the manual sensor, and the installation can be completed in as little as 5 minutes.
- Dual Frequency: 315MHz / 433 MHz Sensors
- Battery Life: 4-6 Years
- Color: Black with Silver
- Product Type: TPMS Sensor, Tire Pressure Sensor, Tire Sensor
- Simple Programming with THINKTPMS G1 Tool
- Supports more than 115 Vehicle Brands
- Simple & Easy to use
- Requires Installation
Compatible tools:
- THINKCAR TPMS T-Wand 100 Professional TPMS
- THINKTOOL TPMS G2 Wand Activator From Thinkcar
- THINKTOOL T-Wand 90
- THINKTOOL T-Wand 100
- THINKTOOL T-Wand 900
- THINKTOOL Euro Expert
- THINKTOOL ThinkCar Euro Max Diagnostic Scan Tool
- THINKTOOL Euro Max Lite
- THINKTOOL Euro Master X
- THINKTOOL IMMO Master
- THINKTOOL Euro Master SE
Fully Pre-Programmed TPMS Sensors – FIT AND FORGET…
STEP 1 – ORDER
Order your TPMS Sensors – Our listings are pre-defined into Make, Model and Year. Once your order has been received, we then carefully, individually and uniquely pre-programme your TPMS sensors. This is not an “off the shelf” operation. Each sensor is pre-programmed and set-up specifically for your vehicle. We’ve spent serious time, development and investment with this step to make it simple and straightforward for you.
STEP 2 – FIT
Fit your new TPMS Sensors – Any experienced Tyre Fitter will be able to carry out this service for you. There’s nothing else that you need to do, the sensors will arrive READY TO FIT. We’ve taken the stress out of this and completed the technical coding of the sensors for you.
STEP 3 – DRIVE
DO NOT ALLOW YOUR TYRE FITTER TO ATTEMPT TO RE-CODE! Just drive your vehicle – To complete the operation, all that is needed is to drive the vehicle. Yes! It really is that easy! On average it takes around 15 minutes on a steady drive to allow the new pre-programmed sensors to communicate back to the vehicle’s systems. Voila! Your TPMS warning light will now be extinguished. Easy Peasy! Obviously there’s a lot more to it, but it all happens behind the scenes when the vehicle is in motion. We are more than happy to go through the finer details but it’s rather long-winded!"
Reviews
There are no reviews yet.