MyTPMS Automate Sensors Disclaimer

This Disclaimer is published by MyTPMS Australia (ABN: 53 807 701 500), trading as MyTPMS Automate Sensors, of Unit 5-6, 44-50 Westall Road, Springvale VIC 3171, Australia. It applies to all content, product information, technical guidance, compatibility data, vehicle relearn procedures, videos, blog articles, and other material published on our website at mytpms.com.au, and to all communications issued by our team through email, phone, live chat, or WhatsApp.

This Disclaimer must be read alongside our Terms and Conditions, Warranty Policy, Returns and Refund Policy, Legal Notice, and all other policies forming part of our complete customer agreement. Together, these documents set out the full basis on which we supply products and on which you use our website.

By accessing our website, browsing our product catalogue, placing an order, watching our instructional videos, reading our compatibility guides, or otherwise engaging with any content we publish, you acknowledge that you have read and understood this Disclaimer and agree to its terms. If you do not agree, please discontinue use of the website and do not proceed with a purchase.

All content published on mytpms.com.au is provided for general product information, purchasing guidance, and educational purposes relating to Tyre Pressure Monitoring System (TPMS) technology and automotive sensor products. While MyTPMS Australia takes all reasonable steps to ensure that the information on this website is accurate, complete, and current at the time of publication, we make no representation or warranty of any kind — express or implied — that the information will remain accurate at all times or that it is free from error, omission, or outdated content.

Vehicle technology, TPMS protocols, regulatory requirements, and product specifications are subject to change without notice. New vehicle models, mid-cycle facelifts, regional production variants, and software updates issued by vehicle manufacturers can affect sensor compatibility, programming procedures, and relearn methods at any time and without any public announcement. We update our website content as promptly as possible when we become aware of changes, but we cannot guarantee that every page reflects the absolute latest specifications at any given moment.

The product listings, compatibility tables, vehicle application guides, relearn procedure pages, and technical articles on this website were accurate as at the date shown on each respective page. Where no specific update date is shown, you should treat the information as a starting guide only and confirm current accuracy with our team before making a purchasing or installation decision. Our team can be reached at sales@mytpms.com.au or on +61 1300 818 030 during business hours.

MyTPMS Australia reserves the right to modify, update, correct, or remove any content on this website at any time and without prior notice. This includes product descriptions, pricing, specifications, compatibility data, and policy documents. The version of any page content that is live on the website at the time you access it is the version that applies. We are not obligated to notify you of changes to general informational content, though changes to pricing or terms that affect a specific pending transaction will be communicated to you directly.

Vehicle compatibility information published on our website — including product listing fitment tables, application guides, the vehicle make and model selector, and the TPMS relearn procedure library — is provided as a guide only. It is based on manufacturer technical data, known TPMS protocol specifications, our own field testing, and feedback from our network of automotive professionals. It does not constitute a guarantee that a specific sensor will be compatible with every variant of every listed vehicle.

TPMS sensor compatibility is affected by numerous variables that cannot always be predicted from a vehicle's make, model, and year alone. The following factors can cause a sensor that is listed as compatible to require additional configuration, to need a different variant, or in some cases to be incompatible with a specific vehicle unit:

• Production date and build series: A vehicle sold in the same model year may have different TPMS hardware depending on its week of manufacture or assembly plant. Mid-production-year changes by vehicle manufacturers are common and are not always publicly documented.
• Regional and market variants: The same vehicle name may use different TPMS frequencies in different countries — notably 315 MHz (common in North America and some Asian markets) versus 433 MHz (common in Australia, Europe, and the UK). Always confirm the frequency of your vehicle's existing sensors before ordering.
• OEM supplier changes: Vehicle manufacturers change their OEM TPMS sensor supplier between production runs. A vehicle produced in early 2024 may use a different OEM sensor to the same model produced in late 2024, even if the vehicle model designation is identical.
• ECU software versions: The vehicle's Electronic Control Unit (ECU) or Body Control Module (BCM) software version affects the sensor IDs it will accept and the relearn procedure required. Software updates issued by vehicle manufacturers as part of dealer servicing or recall programs can change the programming requirements for TPMS sensors.
• Aftermarket wheel and valve configurations: Vehicles fitted with non-standard aftermarket wheels or valve configurations may require a different sensor body type, valve length, or mounting configuration that differs from the standard OE fitment listed in our application guide.
• Grey import and parallel import vehicles: Vehicles privately imported into Australia from Japan, the United Kingdom, the United States, or other markets may have TPMS hardware that does not match the locally sold version of the same model. Compatibility for grey-import vehicles must be individually verified.

MyTPMS Australia strongly recommends that all customers — particularly those purchasing sensors for newer vehicles, uncommon variants, or vehicles they are uncertain about — contact our team to confirm compatibility before placing an order. Providing us with your vehicle's VIN (Vehicle Identification Number) and, where possible, the part number printed on your existing sensors is the most reliable way to ensure the correct product is selected. Our technical support team is available Monday to Friday, 09:00–17:00 AEST at +61 1300 818 030 or sales@mytpms.com.au.

MyTPMS Australia takes all reasonable care to ensure that product descriptions, technical specifications, images, part numbers, and other information published on our product listing pages are accurate and complete at the time of publication. We use manufacturer-supplied data sheets, our own product testing, and ongoing review of field performance data to maintain the accuracy of this information.

Product images displayed on our website are representative of the product supplied. Minor variations in colour tone, packaging design, or label appearance may occur between production batches without affecting the stated product specification, performance, or function. Where a product image shows multiple items (for example, a set of four sensors), the listing quantity will always clearly state whether the price is for a single item or a set. If you are uncertain about the quantity included, please confirm with our team before ordering.

Part numbers listed on our website, including OE cross-reference numbers, superseded part numbers, and aftermarket equivalent part numbers, are provided to assist with product identification only. They are not a binding representation that the product is manufactured by or affiliated with the original equipment manufacturer (OEM) unless the listing explicitly states that the product is an OEM or genuine OE part. Our Automate range is an aftermarket product designed and manufactured to OE-equivalent specification and is clearly identified as such in all listings.

Performance specifications including operating frequency, pressure sensing range, temperature range, battery life estimates, transmission range, and protocol compatibility are derived from manufacturer datasheets and our own controlled testing environment. Actual real-world performance may vary depending on the vehicle's TPMS receiver hardware and software, environmental conditions, tyre operating temperature, wheel material, and installation quality. Battery life estimates are based on typical driving cycles and should be treated as indicative rather than guaranteed figures.

Products in our range are periodically updated by the manufacturer to improve performance, reliability, or to meet changes in vehicle requirements. Updated versions may differ from earlier versions in minor ways — for example, updated firmware, revised valve design, or packaging changes — while delivering the same or improved functional performance. Where a product is materially changed in a way that affects its application or compatibility, we will update the relevant product listing. We are not obligated to notify existing customers of minor product revisions that do not affect performance or compatibility.

TPMS sensors are safety-relevant automotive components. Incorrect installation, incorrect programming, or use in an application for which the product is not designed can result in the sensor failing to transmit accurate tyre pressure data, which may cause the vehicle's TPMS warning system to display false warnings, fail to warn of a genuine low-pressure condition, or behave unpredictably. MyTPMS Australia provides installation guidance, programming instructions, and TPMS relearn procedure guides as an educational resource only. This guidance does not replace the need for qualified installation and programming by a competent person.

MyTPMS Australia recommends that all TPMS sensors are installed, programmed, and relearned by a qualified automotive technician or tyre fitting professional who is trained in TPMS installation procedures and who has access to appropriate tyre removal and mounting equipment. Incorrect tyre removal and mounting procedures are the most common cause of physical damage to TPMS sensors. If you choose to install sensors yourself using one of our DIY TPMS Master Kits, you do so at your own risk and must follow all instructions provided in the kit and in our online operating manual.

The TPMS relearn procedures published at mytpms.com.au/tpms-relearn-guide/ have been compiled from manufacturer service information, technical service bulletins, and field experience. However, vehicle manufacturers issue service procedure updates and software revisions that can change the correct relearn procedure for a specific vehicle without prior notice to aftermarket parts suppliers. MyTPMS Australia does not accept responsibility for errors or omissions in relearn procedures where those errors arise from changes made by the vehicle manufacturer after the procedure was published on our website.

TPMS sensors assist drivers in monitoring tyre inflation pressure. They are an aid to vehicle safety but do not replace the driver's responsibility to regularly inspect tyre condition and inflation pressure manually. A TPMS sensor that is functioning correctly will only alert the driver when tyre pressure falls below the threshold programmed into the vehicle's TPMS module — it does not detect tyre damage, tread wear, sidewall bulges, or other tyre conditions that require visual and physical inspection. Customers must not rely on TPMS sensor data as their sole method of tyre safety monitoring.

The Automate A01 and A02 TPMS diagnostic tools, and all other sensor programming, cloning, and diagnostic tools sold by MyTPMS Australia, are intended for use by automotive professionals and technically competent individuals. These tools communicate directly with vehicle TPMS control modules and can alter sensor programming data. Incorrect use of these tools — including incorrect vehicle selection, incorrect frequency selection, or interrupted programming cycles — can cause sensors to become inoperable or to cease communicating with the vehicle's TPMS receiver. MyTPMS Australia is not liable for sensor or vehicle faults caused by incorrect use of diagnostic tools sold through our store.

MyTPMS Australia does not represent that the installation of any product sold through our store will bring a vehicle into compliance with the roadworthiness standards, vehicle safety regulations, or roadworthy certificate requirements of any particular Australian state or territory, or of any other country. Roadworthiness standards in Australia are governed at the state and territory level by the relevant roads authority (for example, VicRoads in Victoria, NSW Roads in New South Wales) and the requirements can vary between jurisdictions.

Customers are solely responsible for ensuring that any TPMS sensor, diagnostic tool, or related accessory installed in their vehicle complies with the vehicle safety and modification regulations applicable in their state, territory, or country. Where a customer is unsure whether the installation of aftermarket TPMS sensors requires approval, notification, or inspection under applicable regulations, they should seek advice from the relevant roads authority or a registered vehicle inspector before proceeding.

Customers purchasing from outside Australia are solely responsible for determining whether the products they purchase comply with the vehicle modification, radio frequency, and automotive component regulations applicable in their country. TPMS sensors operate on radio frequencies (315 MHz and 433 MHz) that are regulated by spectrum authorities in each country. While our products are designed to comply with applicable frequency regulations in major markets, customers in countries with differing spectrum regulations should verify frequency compliance before importing and installing the products.

Automate TPMS sensors sold for the Australian market are designed to operate at frequencies compliant with the Australian Communications and Media Authority (ACMA) radiocommunications framework. Customers who import sensors purchased from our website into other jurisdictions are responsible for confirming that the operating frequency complies with the spectrum regulations of their destination country.

All prices displayed on mytpms.com.au are in Australian Dollars (AUD) and include Australian Goods and Services Tax (GST) at 10%, unless the product listing or checkout process explicitly states otherwise. For international customers, the price paid is in AUD and does not include any import duties, customs fees, foreign transaction fees charged by your bank or card issuer, or local taxes that may be payable upon delivery in your destination country.

MyTPMS Australia takes all reasonable care to ensure that prices displayed on our website are accurate. However, pricing errors can occur due to technical faults, system errors, or human error in the product management process. In the event that a product is displayed at an incorrect price, we reserve the right to cancel any order placed at that incorrect price before dispatch and to offer you the option to proceed at the correct price or receive a full refund. We will notify you promptly by email if such a situation arises.

Price changes may occur at any time without prior notice. The price applicable to your order is the price displayed at the time your order is confirmed. If a price decreases after you have placed an order, we are not obligated to offer a price adjustment, though we will consider reasonable requests on a case-by-case basis.

Product availability on our website reflects stock levels at the time the page is loaded and may not always reflect real-time inventory. In exceptional circumstances, a product that appears available at the time of ordering may become unavailable due to concurrent purchases or a stock discrepancy identified during order fulfilment. If this occurs, we will contact you within one business day to advise the expected restock date or to offer a suitable alternative or a full refund.

Promotional offers, discount codes (including our current storewide discount code), and sale prices published on our website or communicated through our marketing channels are subject to the specific terms and conditions attached to each offer. Promotional offers apply to the products and order values stated in the offer terms and cannot be combined with other promotions unless explicitly stated. MyTPMS Australia reserves the right to withdraw, modify, or extend any promotional offer at any time. Promotional pricing does not apply retroactively to orders already placed.

Estimated delivery timeframes published on our website and provided at checkout are indicative only. Actual delivery times depend on factors outside our control including carrier capacity, public holidays, weather events, customs processing times for international orders, and the delivery address location. MyTPMS Australia does not guarantee delivery within any specific timeframe and will not be liable for costs or losses arising from delivery delays caused by circumstances outside our reasonable control. For time-sensitive orders, please contact our team before placing your order to discuss current despatch and estimated delivery timelines.

Customer reviews, ratings, testimonials, and user-generated feedback published on our website or shared on our social media channels (YouTube, Instagram, Facebook) reflect the genuine experiences and opinions of individual customers at the time they were submitted. They represent individual results and are published in good faith as an honest reflection of customer experience with our products and service.

Customer reviews and testimonials describe individual experiences with specific vehicles, installation conditions, and use cases. They do not guarantee that you will achieve the same results, experience the same level of ease of installation, or obtain the same programming outcome with your specific vehicle. TPMS sensor performance, ease of programming, and compatibility can vary significantly depending on the vehicle, the installer's technical experience, and the vehicle's software configuration at the time of installation.

Video demonstrations, installation guides, programming tutorials, and product review videos published on our YouTube channel at youtube.com/@mytpms7938 and embedded on our website are provided for educational and informational purposes only. The vehicles, software versions, and tool configurations shown in our videos may differ from your specific vehicle and equipment. The procedures shown are intended as a general guide and should be adapted to suit your specific vehicle's requirements using the vehicle-specific relearn guides available on our website. Results shown in demonstration videos reflect the conditions present in that specific recording and are not a guaranteed outcome for all installations.

MyTPMS Australia does not publish fabricated, incentivised, or selectively edited reviews. We do not pay customers to leave positive reviews, offer discounts in exchange for specific review content, or remove negative reviews for commercial reasons. Where we respond to a negative review, we do so to offer a resolution, not to suppress the review. Our response to reviews is part of our genuine commitment to customer service and continuous improvement.

Our website contains links to external websites and platforms operated by third parties, including vehicle manufacturer websites, Australian Government authority websites (such as the ACCC, ACMA, and ATO), dealer and fitting centre directories, and our own social media pages on YouTube, Instagram, and Facebook. These links are provided for reference and convenience only.

MyTPMS Australia does not control the content, accuracy, privacy practices, or availability of any third-party website. The inclusion of a link to an external website does not constitute an endorsement, recommendation, or approval by MyTPMS Australia of that website, its operator, or the information it contains. We are not responsible for the content published on any third-party website, even if that website links to our content or is linked from our website.

Our website may embed videos from our YouTube channel and display social media content from our Facebook and Instagram pages. This content is hosted and served by third-party platforms (Google/YouTube, Meta). The collection and use of data by these platforms when you interact with embedded content is governed by the respective platform's privacy policy, not ours. We recommend reviewing the privacy policies of YouTube, Facebook, and Instagram if you have concerns about data collected through your interaction with embedded content.

References to vehicle makes, models, and brands throughout our website — including in compatibility guides, relearn procedure pages, and product listings — are made for the purpose of identifying the vehicles with which our products are compatible. These references are not intended to imply any affiliation, sponsorship, authorisation, or commercial relationship between MyTPMS Australia and the relevant vehicle manufacturer. All vehicle brand names and trademarks referenced on our website are the property of their respective owners.

The dealer and fitting centre locator at mytpms.com.au/fitting-centres/ lists authorised MyTPMS fitting centres and dealers as known to us at the time of publication. MyTPMS Australia does not warrant the current accuracy of this directory, including business hours, contact details, or service availability. We are not responsible for the quality of installation or programming work carried out by listed fitting centres. Any arrangement you make directly with a fitting centre is a private arrangement between you and that business.

Nothing published on mytpms.com.au, or communicated by our staff through any channel, constitutes formal professional advice of any kind. Specifically:

Product information, compatibility guidance, installation instructions, TPMS relearn procedures, and programming instructions published on our website and provided by our team are intended as practical product-use guidance only. They do not constitute professional automotive engineering advice, and they do not replace the need for assessment by a qualified automotive technician for complex installation scenarios, unusual vehicles, or situations involving vehicle safety systems beyond TPMS. For decisions involving vehicle safety certification, roadworthy inspections, or structural vehicle modifications, always consult a qualified automotive engineer or registered vehicle inspector.

Policy pages, disclaimer language, terms and conditions, and any explanation of consumer rights published on our website are provided for informational transparency purposes only. They reflect our good-faith understanding of applicable Australian consumer law and selected international consumer protection frameworks. They do not constitute legal advice and should not be relied upon as such. If you have a specific legal question about your rights in relation to a product purchase, we recommend seeking independent legal advice or contacting your local consumer protection authority.

Any pricing comparisons, cost-savings references, value statements, or fleet cost information published on our website are provided as general commercial context only. They are not financial advice and should not be the sole basis for any financial or commercial purchasing decision. For fleet purchasing, wholesale arrangements, or large-scale procurement, we recommend requesting a formal written quotation from our sales team to confirm pricing, availability, and commercial terms before committing.

To the maximum extent permitted by applicable law, MyTPMS Australia excludes all liability for any indirect, incidental, special, consequential, or punitive loss or damage arising from your use of our website, your reliance on information published on our website, or the purchase, installation, or use of any product sold by us. This exclusion covers, without limitation:

• Loss of income, revenue, or profit arising from vehicle downtime, incorrect sensor selection, or product failure
• Workshop labour costs, tyre removal and refitting costs, or wheel balancing costs incurred in connection with a product fault or warranty claim
• Costs arising from a failed roadworthy inspection connected to TPMS sensor function or installation
• Costs arising from reliance on compatibility information that proves incorrect for a specific vehicle variant not within our knowledge at the time the information was published
• Loss of data, loss of programming configurations, or costs arising from incorrect use of diagnostic tools purchased from our store
• Towing, roadside assistance, or emergency repair costs attributable to tyre-related incidents, even where a TPMS sensor fault or failure to warn was a contributing factor

Where liability cannot be entirely excluded under applicable law, the total liability of MyTPMS Australia to any individual customer — whether arising in contract, tort, under statute, or otherwise — for any claim arising from or connected to a product or transaction is limited to the amount paid by that customer for the specific product that is the subject of the claim, as shown on the original invoice issued by MyTPMS Australia.

MyTPMS Australia does not warrant that the mytpms.com.au website will be continuously available, free from errors, free from viruses or harmful code, or that defects will be corrected immediately. We are not liable for any loss or damage arising from website downtime, technical errors, security incidents affecting third-party platforms we use, or interruptions to our online services caused by factors outside our reasonable control including hosting provider outages, DDoS attacks, or internet infrastructure failures.

Under the Australian Consumer Law, when you purchase products from MyTPMS Australia as a consumer, you are legally entitled to the following guarantees regardless of anything stated in this Disclaimer:

• Acceptable quality: Products must be safe, durable, free from defects, and perform as a reasonable consumer would expect for the type of product purchased.
• Fit for any disclosed purpose: Where you told us the specific purpose for which you needed the product and we confirmed it was suitable, the product must perform that disclosed purpose.
• Match description: Products must correspond to any description provided on our website, in written communications, or verbally by our team at the time of sale.
• Spare parts and repair facilities: We will take reasonable steps to ensure that spare parts and repair support are available for a reasonable period after the sale.

If a product fails to meet a consumer guarantee, you are entitled to a remedy. For a major failure, you can choose between a refund, a replacement, or compensation for the reduction in value of the goods. For a minor failure, we may choose to repair or replace the product, or provide a refund.

To exercise your ACL rights, contact us at sales@mytpms.com.au or call +61 1300 818 030. You may also contact Consumer Affairs Victoria at consumer.vic.gov.au or the ACCC at accc.gov.au for independent guidance on your rights.

MyTPMS Australia ships products to customers worldwide. While this Disclaimer is written primarily under Australian law, we acknowledge that international customers hold statutory rights under the consumer protection legislation of their own country, and we respect and honour those rights. The following jurisdiction-specific notices apply to customers in the stated countries and regions, in addition to any rights arising under our voluntary policies.

This Disclaimer and all transactions conducted through mytpms.com.au are governed by the laws of the State of Victoria, Australia and the laws of the Commonwealth of Australia. For international customers, this governing law provision does not override any mandatory rights you hold under the compulsory consumer protection laws of your own country. Both parties irrevocably submit to the non-exclusive jurisdiction of the courts of Victoria for the resolution of any dispute arising from this Disclaimer or from any transaction with MyTPMS Australia.

International customers who cannot access Australian domestic dispute resolution mechanisms due to geographic or practical constraints are encouraged to contact us at sales@mytpms.com.au in the first instance. We commit to engaging in good-faith resolution of international disputes through direct correspondence and, where appropriate, internationally recognised online dispute resolution frameworks. We will not use jurisdictional complexity as a means of avoiding our genuine obligations to international customers.

All original content on mytpms.com.au — including product photography, written descriptions, vehicle compatibility guides, relearn procedure content, video content, the MyTPMS brand identity, the Automate product brand, logos, website design, and user interface elements — is the intellectual property of MyTPMS Australia or is used under licence. All rights are reserved.

You must not copy, reproduce, republish, scrape, redistribute, display, transmit, or otherwise exploit any content from our website — including product descriptions, compatibility data, relearn procedures, pricing, images, or video content — for any commercial purpose without our prior written consent. Extracting our compatibility database or relearn procedure library for use in a competing product, service, or application is strictly prohibited and may constitute a breach of our intellectual property rights and the Copyright Act 1968 (Cth).

Vehicle brand names, model names, and manufacturer trademarks referenced on our website (such as Toyota, Subaru, Nissan, BMW, Ford, BYD, and others) are the registered trademarks and intellectual property of their respective owners. These references are made solely to describe the vehicles with which our products are compatible and do not imply any affiliation, sponsorship, or commercial relationship between MyTPMS Australia and those vehicle manufacturers. We are an independent aftermarket parts supplier and are not affiliated with any vehicle manufacturer whose brands are referenced on our website.

The Automate brand and Automate product range are associated with MyTPMS Australia. Automate sensors are aftermarket TPMS products designed to OE-equivalent specification. The Automate brand is not affiliated with, endorsed by, or connected to any vehicle manufacturer. All Automate product listings clearly identify these products as aftermarket components.

MyTPMS Australia collects personal information from customers through the website ordering process, enquiry forms, live chat, WhatsApp communication, and phone interactions in accordance with our Privacy Policy and in compliance with the Privacy Act 1988 (Cth) and the Australian Privacy Principles (APPs). The information collected is used solely for the purposes of processing orders, providing customer support, and communicating relevant product and service information.

This website uses cookies and similar tracking technologies to enable essential website functionality, remember your session and cart preferences, and — where you have consented — to provide analytics data about how visitors use our website. A full explanation of the cookies we use, their purpose, and your options for managing or disabling them is available in our Cookie Policy.

MyTPMS Australia does not store your full payment card details on our systems. All payment transactions are processed by secure, PCI-DSS compliant payment processors. Further details about our payment security arrangements are available in our Payment Security Policy.

For customers in the European Union and United Kingdom, our processing of personal data in connection with your purchase and support interactions is conducted in accordance with the General Data Protection Regulation (GDPR) and UK GDPR respectively, to the extent those frameworks apply to cross-border transactions with an Australian business. For customers in other jurisdictions, we apply the same standard of care to your personal data as we apply to Australian customers under the Australian Privacy Principles, as a baseline minimum standard.

TPMS sensors contain non-replaceable lithium coin cell batteries. These batteries are sealed within the sensor housing and are not user-serviceable. Disposal of end-of-life TPMS sensors containing lithium batteries must comply with the applicable waste disposal and battery recycling regulations in your state, territory, or country. In Australia, spent lithium batteries should not be placed in general household waste and should be disposed of through an appropriate battery recycling scheme.

Further information about our approach to environmental compliance and responsible battery disposal is available in our Environmental Compliance and Battery Disposal Policy. MyTPMS Australia encourages all customers to dispose of end-of-life electronic components responsibly and in accordance with the applicable regulations in their jurisdiction.

TPMS sensors are low-power radio frequency devices operating within the ISM and automotive frequency bands. They comply with applicable Australian Communications and Media Authority (ACMA) radiocommunications standards for electromagnetic emissions. They do not pose a radiation hazard under normal operating conditions. However, they should not be physically damaged, punctured, incinerated, or subjected to high temperatures as this may cause battery failure or uncontrolled RF emissions.

In the event that any product sold by MyTPMS Australia is subject to a safety recall, affected customers will be notified directly by email using the contact information provided at the time of purchase. Safety recall information will also be published prominently on our website. Australian customers can also check the ACCC's Product Safety Australia recall database at productsafety.gov.au.

MyTPMS Australia is committed to making our website accessible to all users, including those with disabilities, in alignment with the Disability Discrimination Act 1992 (Cth) and the Australian Government's digital accessibility standards. We are working towards conformance with the Web Content Accessibility Guidelines (WCAG) 2.1 at Level AA.

Despite our best efforts, some content or features on our website may not yet meet all accessibility standards. If you experience any difficulty accessing any part of our website, require product information in an alternative format, or would like to provide accessibility feedback, please contact us at sales@mytpms.com.au or call +61 1300 818 030. We are committed to addressing accessibility barriers promptly. Our full Accessibility Statement is available on our website.

MyTPMS Australia reserves the right to amend, update, or replace this Disclaimer at any time to reflect changes in our business operations, product range, applicable laws, regulatory requirements, or industry standards. Changes will take effect from the date they are published on this page, with the "Last Updated" date revised accordingly.

Where a change materially affects the basis on which you use our website or engage with our products, we will take reasonable steps to notify registered customers by email or through a prominent notice on the website prior to the change taking effect. Your continued use of our website following the publication of any change constitutes your acceptance of the updated Disclaimer.

We encourage you to review this page periodically to ensure you are aware of the current terms that apply to your use of our website and any products you purchase from us.

This Disclaimer forms part of a comprehensive suite of legal and policy documents that together govern your relationship with MyTPMS Australia. Each of the following documents should be read in conjunction with this Disclaimer. Click any link below to view the full document on our website: