MyTPMS · Sensor setup made clear
Baojun TPMS learning & sensor setup
OBD learning
The Baojun systems listed below use OBD learning. Register replacement sensor IDs through the vehicle’s diagnostic socket after the sensors are ready for the car.
Recommended AUTOMATE tools
Program, clone & activate sensors
For compatible AUTOMATE replacement sensors, we recommend the AUTOMATE Bluetooth Programmer / Cloning Tool. It programs blank sensors, copies supported original IDs and activates compatible sensors.
It does not write IDs into the car through OBD. A correctly pre-programmed sensor does not need blank-sensor programming again.
View AUTOMATE programmerFor OBD learning
Register IDs in the car
We recommend the AUTOMATE Bluetooth OBD Reader & Writer for supported vehicle applications. It writes sensor IDs through the car’s OBD socket.
Choose this for the vehicle-registration step, alongside a sensor programmer if your replacement sensors are blank. Match the exact model, year and OBD write support before ordering.
View AUTOMATE OBD toolFind the right Baojun product
Match your model, build date and existing sensor part number to the correct product. We can help with the match before you order.
Browse Baojun productsWhich method does your Baojun use?
Use the build date, not just the registration year. When rows overlap, match the sensor part number, frequency and market.
Choose your model to narrow the list. Each row states the learning method.
| Model | Build dates | Sensor / system | Learning method |
|---|---|---|---|
| Cloud | 2023/08 – 2025/12 | 433MHz 23851617 · Australia | OBD learning |
| Cloud | 2023/08 – 2025/12 | 433MHz 23818042 · Australia | OBD learning |
| Yep | 2023/05 – 2025/12 | 433MHz 23851617 · Australia | OBD learning |
| Yep | 2023/05 – 2025/12 | 433MHz 23984663 · Australia | OBD learning |
| Yep | 2023/05 – 2025/12 | 433MHz 23818042 · Australia | OBD learning |
| Yep Plus | 2024/03 – 2025/12 | 433MHz 23984663 · Australia | OBD learning |
What this means for you
OBD learning
A TPMS OBD tool writes the sensor IDs into the car through its diagnostic socket. Programming the sensors alone does not complete this step.
Before and after learning
- Check cold tyre pressures against the vehicle’s tyre placard and repair any leak.
- Match the replacement sensor to the vehicle. Program a blank sensor or copy the original ID when your chosen setup requires it.
- Complete the learning method shown for your model. Check that the warning clears and that all monitored tyre readings appear, where the car displays them.
- If the warning remains, check pressure loss, sensor response and system faults. Repeating a reset does not repair a failed sensor.
Need the right sensor and tool combination?
Send us your Baojun model, build month/year and sensor part number. We will help you choose the correct product and learning method.
