VOLVO TPMS RELEARN PROCEDURE
Select your vehicle to find compatible tyre pressure sensors and follow the correct Volvo TPMS relearn procedure. This guide covers the listed Volvo models and the standard drive-cycle and stationary relearn process.
Select Your Vehicle to Find Compatible Tyre Pressure Sensors
Use the selector below to help customers choose the correct Volvo TPMS sensor for their vehicle.
Drive Relearn Method
These Volvo vehicles commonly use a drive-cycle relearn method, allowing the system to learn new sensor IDs after driving and parking.
Before You Start
Ensure all tyres are inflated to the pressure listed on the tyre placard before beginning the relearn process.
Alternative Option
A properly formatted scan tool can also be used to complete the Volvo TPMS relearn procedure where required.
Applicable Volvo Models
The following Volvo vehicles commonly use this TPMS relearn procedure.
Volvo TPMS Relearn Procedure
Follow these steps to allow the system to learn the new TPMS sensor IDs.
- Ensure all tyres are inflated to the pressure listed on the tyre placard.
- Drive the vehicle at more than 25 mph for longer than 10 minutes.
- Park the vehicle for more than 15 minutes.
- Allow the system to learn the new sensor IDs during this drive-and-park cycle.
Setup Tips for Successful Relearn
These checks can improve the success rate of the Volvo TPMS relearn process.
Correct Tyre Pressure
Set all tyres to the correct placard pressure before starting the drive cycle.
Complete the Drive Cycle
Drive above 25 mph for more than 10 minutes before parking the vehicle.
Allow Stationary Time
Leave the vehicle parked for more than 15 minutes so the system can finish learning.
Use a Scan Tool if Needed
If the system does not learn the sensors automatically, use a properly formatted scan tool.
Get Help with Volvo TPMS Sensors
If you need help choosing the correct Volvo TPMS sensors or troubleshooting the relearn process, contact MyTPMS for expert support and compatibility advice.
