Quickly turn the ignition from OFF to RUN (engine OFF) three times, stop in RUN position
Press and release brake pedal
Turn ignition OFF
Quickly turn the ignition from OFF to RUN (engine OFF) three times, stop in RUN position
NOTE: All the steps for this process must be performed with 10 seconds
A single horn chirp will indicate the relearn mode is active
Use your TPMS tool to activate the left front sensor
A single horn sounds to indicate sensor learning successful
Repeat for the right front, right rear and left rear sensors
TRAINING MODE COMPLETE will display on the message centre when relearn is finished
Manual relearn procedure (push-button start):
Important note, some models require the start button to be pressed twice (without pressing the brake) to enter RUN mode (Ignition ON/Engine OFF). If this is the case, modify steps 3 and 5 as noted.
Engage the parking brake and inflate all tires
With the vehicle OFF, push and release the brake pedal
Push START button 5 times (NOTE: 8 times if 2x-to-RUN)
Press and release the brake pedal
Push START button 6 times (NOTE: 9 times if 2x-to-RUN)
A single horn chirp will indicate the relearn mode is active
Use the tool to activate the left front sensor
A single horn sounds to indicate sensor learning successful
Repeat for the right front, right rear and left rear tires
TRAINING MODE COMPLETE will display on the message center when relearn is finished
Troubleshooting tips
Lowering the driver’s side window may help to complete this process on larger vehicles.
Ford Expedition vehicles may require the start button to be pressed twice during the relearn (without pressing the brake) to enter into RUN mode during the relearn (Ignition ON/Engine OFF). If this is the case, modify steps the manual steps for the push-button start relearn, 3 and 5, as noted in the relearn procedure.