TESLA TPMS RELEARN PROCEDURE
The TPMS sensors can be reset via the vehicle’s touchscreen.
Note: The reset function is only possible when the vehicle is on.
Caution: Only use approved sensors when performing this procedure. According to the selected wheel size, the vehicle sets the pre-defined Recommended Cold Pressure (RCP) target values. Before driving the vehicle, it is necessary to verify that the wheel size is correct and the TPMS sensors are functioning.
Auto Relearn Procedure:
- Turn the touchscreen on
- From the touchscreen, touch Controls > Settings > Service & Reset > Tyre Pressure Monitor > Reset Sensors. Reset the sensors based on the wheel size.
- Caution: Selecting the incorrect wheel size may result in false tyre pressure warnings. If a tyre pressure warning displays, exit the vehicle, close the rear trunk and all doors, wait for the touchscreen to go black, then re-enter the vehicle and ensure that the correct wheel size is selected before touching Reset.
- Touch Reset, and then touch OK.
- Press and hold one of the scroll wheels and select ‘Car Status’ to see a overview of the TPMS information. When the sensors are unknown at start, all the values will be shown as –.
- Note: Make sure that the vehicle is stationary for at least 20 minutes before continuing to the next step.
- Perform a road test. Auto learning will start when the vehicle exceeds 40 km/h (25 mph). Auto learning can take up to 20 minutes during a test drive.