BENTLEY TPMS MANUAL RELEARN PROCEDURE
Select your vehicle to find compatible tyre pressure sensors and follow the correct Bentley TPMS manual relearn procedure. This process is completed through the vehicle controls and a short drive cycle.
Select Your Vehicle to Find Compatible Tyre Pressure Sensors
Use the selector below to help customers choose the correct Bentley TPMS sensor for their vehicle.
Procedure Type
These Bentley vehicles commonly use a Manual Relearn Procedure through the instrument cluster, followed by a short drive cycle.
Before You Start
Make sure all tyres are set to the correct placard pressure before starting the relearn procedure.
Important Step
The relearn process is triggered through the VEHICLE function key on the instrument cluster.
About This Procedure
This Bentley TPMS process is completed manually through the vehicle controls rather than by automatic detection alone.
Before starting, ensure the handbrake is applied, the ignition is in the correct position, and all tyre pressures are adjusted correctly.
Once the relearn is started through the instrument cluster, a short drive cycle is usually required for the system to complete registration.
Manual Relearn Procedure – Drive
Follow these steps to complete the Bentley TPMS relearn process.
- Apply the handbrake.
- Inflate all tyres to the correct pressure.
- Turn the ignition to ON.
- Press the “VEHICLE” function key on the instrument cluster.
- Drive the vehicle for approximately 15 minutes.
Setup Tips for Successful Relearn
These checks can improve the success rate of the Bentley manual relearn process.
Set Correct Pressure
Always inflate all tyres to the correct pressure before starting the relearn procedure.
Use Ignition ON
Make sure the ignition is in the ON position before accessing the TPMS-related vehicle settings.
Use the VEHICLE Key
Press the VEHICLE function key on the instrument cluster to begin the relearn process correctly.
Complete the Drive Cycle
A 15-minute drive is generally required for the system to complete the TPMS relearn.
Get Help with Bentley TPMS Sensors
If you need help choosing the correct Bentley TPMS sensors or troubleshooting the relearn process, contact MyTPMS for expert support and compatibility advice.
