GEELY AUTO TPMS RELEARN PROCEDURE
Select your vehicle to find compatible tyre pressure sensors and follow the correct TPMS setup process. When replacing sensors on Geely vehicles, a properly formatted scan tool is required to learn and register the new sensor IDs.
Select Your Vehicle to Find Compatible Tyre Pressure Sensors
Use the selector below to help customers choose the correct Geely TPMS sensor and programming solution.
Programming Required
A properly formatted scan tool is required to learn new sensor IDs when replacing TPMS sensors on Geely vehicles.
Recommended Tool
We highly recommend the AUTOMATE Bluetooth Programmer to help ensure successful activation and setup of your sensors.
Workshop Tip
Communication issues and temporary TPMS warning lights can sometimes happen during service, but they can usually be resolved with the correct checks and relearn procedure.
TPMS Sensor ID Registration
Follow these steps when fitting replacement TPMS sensors to Geely Auto vehicles.
- Install the correct TPMS sensors into the vehicle.
- Connect a properly formatted scan tool to the vehicle.
- Use the scan tool to learn and write the new sensor IDs into the system.
- Confirm successful communication between the scan tool and the ECU.
- Activate the sensors if required using a compatible TPMS activation device.
- Verify that the TPMS warning light clears after registration or during normal driving.
Common Communication and MIL Issues
Check the following if the scan tool does not communicate properly or the warning light remains on.
Check the OBDII Fuse
The vehicle may arrive at your workshop with the OBDII fuse blown. If your scan tool shows a communication error while writing sensor IDs, verify that this fuse is not blown.
Sensor Sleep During Service
During some types of service, the TPMS sensors may temporarily shut off, resulting in a MIL / TPMS warning light when the vehicle is started afterwards.
Warning Light May Clear While Driving
In many cases, the MIL will switch off again during normal driving conditions once the sensors wake up and resume communication.
Relearn in the Workshop
You can also perform an ID relearn using a properly formatted scan tool to turn the MIL off before the vehicle leaves the workshop.
Get Help with Geely TPMS Programming
If you need help choosing the correct sensors, writing new ECU IDs, or selecting the right TPMS tool, contact MyTPMS for expert support and compatibility advice.
