MyTPMS · Sensor setup made clear
Bugatti TPMS learning & sensor setup
Automatic / self-learning
The Bugatti systems listed below use automatic learning. The vehicle learns compatible sensor IDs while driving; a blank sensor still needs programming first.
Recommended AUTOMATE tools
Program, clone & activate sensors
For compatible AUTOMATE replacement sensors, we recommend the AUTOMATE Bluetooth Programmer / Cloning Tool. It programs blank sensors, copies supported original IDs and activates compatible sensors.
It does not write IDs into the car through OBD. A correctly pre-programmed sensor does not need blank-sensor programming again.
View AUTOMATE programmerBuying ready-programmed sensors?
Choose the correct vehicle application and ask us whether the sensor arrives ready for fitting. Vehicle learning may still be needed after installation.
For ID cloning, the original ID must be available. Keep the old sensor set away during learning.
MyTPMS sensor option
Bugatti Chiron TPMS Sensor 7PP907275F 433MHz
This product is for its listed application, not every Bugatti. Match the build date, OE part number and frequency on the product before ordering.
Which method does your Bugatti use?
Use the build date, not just the registration year. When rows overlap, match the sensor part number, frequency and market.
Choose your model to narrow the list. Each row states the learning method.
| Model | Build dates | Sensor / system | Learning method |
|---|---|---|---|
| Chiron | 2016/01 – 2023/12 | 433MHz · Europe / imports | Automatic / self-learning |
| Royale | 2016/01 – 2019/12 | 433MHz · Europe / imports | Automatic / self-learning |
| Veyron | 2005/01 – 2015/12 | 433MHz · Europe / imports | Automatic / self-learning |
| Vitesse | 2016/01 – 2016/12 | 433MHz · Europe / imports | Automatic / self-learning |
What this means for you
Automatic / self-learning
The car learns compatible sensor IDs while driving. This is self-learning by the vehicle, not self-programming of a blank sensor.
Before and after learning
- Check cold tyre pressures against the vehicle’s tyre placard and repair any leak.
- Match the replacement sensor to the vehicle. Program a blank sensor or copy the original ID when your chosen setup requires it.
- Complete the learning method shown for your model. Check that the warning clears and that all monitored tyre readings appear, where the car displays them.
- If the warning remains, check pressure loss, sensor response and system faults. Repeating a reset does not repair a failed sensor.
Need the right sensor and tool combination?
Send us your Bugatti model, build month/year and sensor part number. We will help you choose the correct product and learning method.
