Daihatsu TPMS learning & sensor setup

Recommended AUTOMATE tools

Program, clone & activate sensors

For a confirmed compatible AUTOMATE sensor application, we recommend the AUTOMATE Bluetooth Programmer / Cloning Tool. Let us match your vehicle or receiver first; do not assume an accessory-kit sensor can be programmed by this tool.

It does not write IDs into the car through OBD. A correctly pre-programmed sensor does not need blank-sensor programming again.

View AUTOMATE programmer

Buying ready-programmed sensors?

Choose the correct vehicle application and ask us whether the sensor arrives ready for fitting. Vehicle learning may still be needed after installation.

For ID cloning, the original ID must be available. Keep the old sensor set away during learning.

Find the right Daihatsu product

Match your model, build date and existing sensor part number to the correct product. We can help with the match before you order.

Let us identify your setup

Send your model, build date and the existing sensor or receiver part number. We will tell you the learning method and the right sensor/tool combination.

Before and after learning

1. Check cold tyre pressures against the vehicle’s tyre placard and repair any leak.
2. Match the replacement sensor to the vehicle. Program a blank sensor or copy the original ID when your chosen setup requires it.
3. Complete the learning method shown for your model. Check that the warning clears and that all monitored tyre readings appear, where the car displays them.
4. If the warning remains, check pressure loss, sensor response and system faults. Repeating a reset does not repair a failed sensor.