JAGUAR TPMS RELEARN PROCEDURE

Manual Relearn Procedure 

Jaguar Models with PUSH-BUTTON IGNITION

• Inflate all tyres to pressure listed on vehicle placard.
• With the vehicle off, press and release the brake pedal.
• Press, and hold, the START button until a chime sounds.
• Power OFF by pushing the button 1 time.
• Press, and hold, the START button until a chime sounds.
• Horn will sound once, and the TPMS tell-tale will blink once, indicating train mode is initiated. If equipped with a message centre, it will display TRAIN LF TYRE.
• Starting with the LF tyre, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
• After training LR tyre, the message centre will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message centre display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the t raining procedure must be repeated.
• Turn ignition to the OFF position.