MyTPMS · Sensor setup made clear
NIO TPMS learning & sensor setup
The learning method depends on the model
NIO systems differ by model and build date. This page identifies automatic / self-learning, copy original sensor ids. Select your model to see which applies.
Recommended AUTOMATE tools
Program, clone & activate sensors
For compatible AUTOMATE replacement sensors, we recommend the AUTOMATE Bluetooth Programmer / Cloning Tool. It programs blank sensors, copies supported original IDs and activates compatible sensors.
It does not write IDs into the car through OBD. A correctly pre-programmed sensor does not need blank-sensor programming again.
View AUTOMATE programmerBuying ready-programmed sensors?
Choose the correct vehicle application and ask us whether the sensor arrives ready for fitting. Vehicle learning may still be needed after installation.
For ID cloning, the original ID must be available. Keep the old sensor set away during learning.
MyTPMS sensor option
Nio EC6 TPMS Sensor A2C19400902/A2C19400901 433MHz
This product is for its listed application, not every NIO. Match the build date, OE part number and frequency on the product before ordering.
Which method does your NIO use?
Use the build date, not just the registration year. When rows overlap, match the sensor part number, frequency and market.
Choose your model to narrow the list. Each row states the learning method.
| Model | Build dates | Sensor / system | Learning method |
|---|---|---|---|
| EC6 | 2020/01 – 2024/12 | 433MHz · Europe / imports | Automatic / self-learning |
| EC6 | 2024/01 – 2025/06 | 433MHz P0242518 · Europe / imports | Copy original sensor IDs |
| EC7 | 2022/12 – 2024/12 | 433MHz · Europe / imports | Copy original sensor IDs |
| EL7 | 2022/01 – 2025/06 | 433MHz · Europe / imports | Copy original sensor IDs |
| EL8 | 2022/06 – 2023/12 | 433MHz · Europe / imports | Automatic / self-learning |
| ES6 | 2019/01 – 2024/12 | 433MHz · Europe / imports | Automatic / self-learning |
| ES6 | 2020/01 – 2024/12 | 433MHz A2C82481801 · Europe / imports | Copy original sensor IDs |
| ES6 | 2023/05 – 2025/06 | 433MHz P0242518 · Europe / imports | Copy original sensor IDs |
| ES7 | 2022/06 – 2025/06 | 433MHz · Europe / imports | Copy original sensor IDs |
| ES8 | 2022/12 – 2025/06 | 433MHz A3C09420100 · Europe / imports | Copy original sensor IDs |
| ES8 | 2018/01 – 2024/12 | 433MHz · Europe / imports | Automatic / self-learning |
| ET5 | 2021/12 – 2025/06 | 433MHz · Europe / imports | Copy original sensor IDs |
| ET5T | 2023/01 – 2025/06 | 433MHz · Europe / imports | Copy original sensor IDs |
| ET7 | 2021/01 – 2024/12 | 433MHz · Europe / imports | Copy original sensor IDs |
What this means for you
Automatic / self-learning
The car learns compatible sensor IDs while driving. This is self-learning by the vehicle, not self-programming of a blank sensor.
Copy original sensor IDs
Program a compatible replacement sensor with the same ID as the original sensor. Keep each wheel’s ID separate; do not copy one ID onto all four sensors.
Before and after learning
- Check cold tyre pressures against the vehicle’s tyre placard and repair any leak.
- Match the replacement sensor to the vehicle. Program a blank sensor or copy the original ID when your chosen setup requires it.
- Complete the learning method shown for your model. Check that the warning clears and that all monitored tyre readings appear, where the car displays them.
- If the warning remains, check pressure loss, sensor response and system faults. Repeating a reset does not repair a failed sensor.
Need the right sensor and tool combination?
Send us your NIO model, build month/year and sensor part number. We will help you choose the correct product and learning method.
