MyTPMS · Sensor setup made clear
Norauto TPMS learning & sensor setup
Match the TPMS kit, not the car badge
Norauto is a retail and accessory brand. Replacement-sensor setup depends on the fitted receiver or kit. For the listed Nai MAS861 system, the supported replacement route is to copy the original sensor IDs; do not apply that to every Norauto kit.
Recommended AUTOMATE tools
Program, clone & activate sensors
For a confirmed compatible AUTOMATE sensor application, we recommend the AUTOMATE Bluetooth Programmer / Cloning Tool. Let us match your vehicle or receiver first; do not assume an accessory-kit sensor can be programmed by this tool.
It does not write IDs into the car through OBD. A correctly pre-programmed sensor does not need blank-sensor programming again.
View AUTOMATE programmerBuying ready-programmed sensors?
Choose the correct vehicle application and ask us whether the sensor arrives ready for fitting. Vehicle learning may still be needed after installation.
For ID cloning, the original ID must be available. Keep the old sensor set away during learning.
Find the right Norauto product
Match your model, build date and existing sensor part number to the correct product. We can help with the match before you order.
Browse Norauto productsWhich method does your Norauto use?
The model and part number below describe a particular TPMS accessory system. Match the receiver label before ordering.
Choose your model to narrow the list. Each row states the learning method.
| Model | Build dates | Sensor / system | Learning method |
|---|---|---|---|
| Nai | 2019/03 – 2021/12 | MAS861 · Europe | Copy original sensor IDs |
What this means for you
Copy original sensor IDs
Program a compatible replacement sensor with the same ID as the original sensor. Keep each wheel’s ID separate; do not copy one ID onto all four sensors.
Before and after learning
- Check cold tyre pressures against the vehicle’s tyre placard and repair any leak.
- Match the replacement sensor to the vehicle. Program a blank sensor or copy the original ID when your chosen setup requires it.
- Complete the learning method shown for your model. Check that the warning clears and that all monitored tyre readings appear, where the car displays them.
- If the warning remains, check pressure loss, sensor response and system faults. Repeating a reset does not repair a failed sensor.
Need the right sensor and tool combination?
Send us your Norauto model, build month/year and sensor part number. We will help you choose the correct product and learning method.
