Take control of your BYD TPMS with a complete DIY sensor and programming system.
Includes 4 compatible AUTOMATE TPMS sensors, Bluetooth TPMS Programmer and Bluetooth OBDII TPMS interface, giving you the tools required for supported sensor programming, cloning and vehicle-side TPMS registration procedures.
Ideal for replacing failed sensors, fitting aftermarket or replacement wheels, or keeping your own TPMS programming equipment for future use.
Kit includes:
4 × AUTOMATE TPMS sensors
Bluetooth TPMS Programmer
Bluetooth OBDII TPMS Reader / Writer
Phone app support
Setup instructions
MyTPMS Australia technical support
Important: BYD TPMS procedures vary by model, year and TPMS system. Some vehicles may require cloning or another vehicle-specific relearn procedure. Physical installation of the sensors inside the wheels still requires a tyre shop.
Need help with this product?SMS yourself the link or request a call back from our TPMS team.
Save for later
Send this product to yourself
We currently support Australian mobile numbers only for SMS. Enter your mobile number, or add your email address below and we will send you a copy of this product link.
Product link
BYD DIY TPMS Master Kit | 4 Sensors + Programming Tools
Product help
Request a call back
Enter your details and our TPMS team will call you about this product during business hours.
EEC-manufactured and quality-controlled to meet Original Equipment performance standards
Quality:
Premium OE-style TPMS replacement solution, selected for reliable fitment, consistent performance and backed by MyTPMS Australia compatibility support.
Delivery Information:
Free express shipping Australia-wide. Australia-wide Estimated delivery is usually 1-3 business days after dispatch, and international delivery within 7-21 business days with tracking provided where available. See the Shipping Policy for dispatch, delivery, and pickup details.
Returns:
Returns accepted in accordance with our Returns & Refund Policy. Change-of-mind returns must be requested within 30 days of delivery. Programmed, installed, paired, activated, connected, or used TPMS sensors, tools, and electrical items may not be eligible for change-of-mind return unless required by law.
Product Description
BYD DIY TPMS SYSTEM
Understand It.
Program It.
Relearn It.
A complete TPMS sensor and programming system for compatible BYD vehicles — giving you the hardware needed to prepare replacement sensors and complete the appropriate supported TPMS setup procedure.
✓
4 compatible AUTOMATE TPMS sensors
✓
Bluetooth TPMS sensor programmer
✓
Bluetooth OBDII TPMS interface
✓
Programming & supported cloning functions
✓
Setup guidance & MyTPMS Australia support
UNDERSTANDING BYD TPMS
Replacing the Sensor Is Only One Part of the Job
A TPMS sensor is a small electronic device mounted inside the wheel. It measures tyre pressure and transmits that information wirelessly to the vehicle.
But the sensor does more than simply transmit pressure. It also broadcasts its own electronic identification number and communicates using a vehicle-specific TPMS protocol.
That means a replacement sensor must not only physically fit the wheel — it must also be correctly configured for the vehicle, and the BYD must be able to recognise it using the appropriate TPMS procedure.
THE MOST IMPORTANT THING TO UNDERSTAND
Programming, Fitting and Relearning Are Three Different Things
These terms are often used as though they all mean the same thing. They don’t.
01 — PROGRAMMING THE SENSOR
Preparing the Replacement TPMS Sensor
The included Bluetooth TPMS Programmer communicates directly with compatible AUTOMATE sensors. It is used to configure the replacement sensor for the supported BYD application and can also perform supported activation, reading and cloning functions.
02 — PHYSICAL INSTALLATION
Installing the Sensor Inside the Wheel
TPMS sensors are mounted inside the wheel. The tyre therefore needs to be moved away from the rimMS sensors are mounted inside the wheel. The tyre therefore needs to be moved away from the rim so the original sensor can be removed and the replacement installed.
This requires tyre-changing equipment and should be handled by a tyre shop or suitably equipped technician.
03 — VEHICLE RELEARN / REGISTRATION
Making Sure the BYD Recognises the New Sensors
After installation, the vehicle must recognise the replacement sensors. Depending on the exact BYD application, this may involve sensor cloning, a vehicle-specific relearn procedure or supported vehicle-side registration.
AN EASY WAY TO UNDERSTAND IT
Think of a TPMS Sensor Like a New Electronic Key
Imagine buying a replacement electronic key for your vehicle. The key may be physically identical to the original, but that alone does not necessarily mean the vehicle will recognise it.
The replacement TPMS sensor works in a similar way. It can be physically correct and capable of transmitting pressure, but it must also communicate using the correct protocol and, where required, the vehicle must recognise its electronic ID.
WHAT IS A TPMS SENSOR ID?
Think of It as the Sensor’s Electronic Serial Number
Every TPMS sensor transmits an identification code along with its pressure information.
This allows the vehicle’s TPMS system to distinguish the sensors that belong to the vehicle from other nearby TPMS sensors.
When replacement sensors use different IDs from the originals, the appropriate vehicle procedure may be required before those new IDs are accepted.
WHAT’S INCLUDED?
A Complete TPMS Sensor & Programming System
Each part of the Master Kit has a different role.
4 × AUTOMATE TPMS Sensors
These replace the original sensors mounted inside the wheels. The compatible sensors are prepared for the appropriate supported BYD TPMS application.
1 × Bluetooth TPMS Programmer
This communicates directly with compatible TPMS sensors and is used for supported sensor activation, reading, programming and cloning.
1 × Bluetooth OBDII TPMS Interface
This communicates with the compatible vehicle through its OBDII system. It is included for supported vehicle-side TPMS procedures where ECU sensor ID writing is available.
Phone App, Setup Instructions & Support
The supported phone workflow and supplied instructions help guide the programming process, with MyTPMS Australia available for compatibility and setup assistance.
THE COMPLETE MASTER KIT
The Equipment Remains Yours
The four sensors are installed in the wheels. The programming equipment remains yours for future compatible TPMS servicing, sensor replacement or wheel-set changes.
WHAT DOES “PROGRAMMING” ACTUALLY MEAN?
Programming the Sensor Does Not Mean Programming the Car
This distinction is one of the most important parts of understanding TPMS.
SENSOR SIDE
Programming the TPMS Sensor
This prepares the compatible AUTOMATE replacement sensor with the appropriate supported TPMS application so it can communicate correctly.
VEHICLE SIDE
Registering / Relearning the Sensor to the Vehicle
This is the process that allows the compatible vehicle to recognise the replacement sensor or its ID. The exact procedure depends on the vehicle.
WHAT ABOUT CLONING?
Cloning Copies an Existing Sensor ID
Where an original sensor can still be read and the particular application supports cloning, its existing electronic ID can be copied to a compatible AUTOMATE replacement sensor.
Instead of introducing a completely new sensor identity, the replacement can transmit using an ID already associated with the vehicle.
Cloning is not necessarily the correct procedure for every BYD. The appropriate method depends on the exact vehicle and TPMS configuration.
WHAT IF THE ORIGINAL SENSOR IS DEAD?
A Completely Dead Sensor May Not Be Readable for Direct Cloning
Sensor cloning normally relies on knowing the original sensor ID. If the original sensor can no longer transmit and its ID cannot be read directly, another supported method may be required.
This is why checking the condition of the original sensors and confirming the correct BYD procedure before starting can save time later.
WHY DOES THE KIT INCLUDE TWO TOOLS?
Because the Sensor and Vehicle Are Two Different Sides of TPMS
SENSOR SIDE
Bluetooth TPMS Programmer
✓ Activates supported sensors
✓ Reads supported sensor information
✓ Programs compatible AUTOMATE sensors
✓ Performs supported sensor ID cloning
VEHICLE SIDE
Bluetooth OBDII TPMS Interface
✓ Connects through the compatible vehicle’s OBDII port
✓ Used for supported vehicle-side TPMS procedures
✓ Allows sensor ID writing where supported
✓ Complements the sensor programmer when vehicle registration is required
FROM ORDER TO WORKING TPMS
The General BYD TPMS Process
The exact procedure varies depending on the vehicle, but this explains the overall workflow.
Step 1 — Confirm the Exact Vehicle
Confirm the BYD model, year and, where required, VIN or original sensor information so the correct compatible TPMS application can be identified.
Step 2 — Determine the Correct TPMS Method
Identify whether the vehicle requires normal sensor programming, cloning, a vehicle-specific relearn or supported OBD registration.
Step 3 — Prepare the Sensors
Use the Bluetooth Programmer and supported workflow to prepare the compatible AUTOMATE replacement sensors.
Step 4 — Have the Sensors Installed
Take the prepared sensors to a tyre shop or suitably equipped technician for physical installation inside the wheels.
Step 5 — Complete the Required Relearn / Registration
Follow the appropriate vehicle-specific procedure. Where supported and required, use the OBDII interface for the relevant vehicle-side TPMS procedure.
Step 6 — Verify the System
Confirm that the vehicle is receiving all four sensors correctly and that there are no unresolved TPMS warnings.
315 MHz & 433 MHz
Frequency Is Only One Part of Compatibility
TPMS sensors communicate using radio frequency. Compatible applications may operate using 315 MHz or 433 MHz.
However, two sensors using the same frequency are not automatically compatible. The sensor must also communicate using the correct supported protocol and configuration for the vehicle.
This is why the exact BYD model and year should always be confirmed before programming or installation.
IMPORTANT
You Still Need a Tyre Shop for Physical Installation
This is a DIY TPMS programming and setup kit. It does not replace tyre-changing equipment.
The TPMS sensors are mounted inside the wheel. The tyre therefore needs to be moved away from the rim so the sensors can be installed safely.
A tyre shop or suitably equipped technician should perform the physical installation.
WHY BUY THE MASTER KIT?
The Tools Don’t Disappear After the First Sensor Change
Replace ageing or failed sensors Four compatible AUTOMATE replacement sensors are included.
Keep your own sensor programmer The Bluetooth Programmer remains yours for future supported AUTOMATE sensor programming.
Clone supported IDs where appropriate Readable original sensor IDs may be copied to compatible replacement sensors where the application supports it.
Handle supported vehicle-side procedures The OBDII interface gives you the hardware required for compatible vehicle-side TPMS functions.
Use the equipment again later The tools remain with you for future compatible sensor replacement or TPMS servicing.
BYD TPMS QUESTIONS
Frequently Asked Questions
Will my BYD automatically recognise new sensors?
Not necessarily. The correct procedure depends on the vehicle’s TPMS system. Some applications may require cloning, a specific relearn procedure or another supported method.
Does programming the sensor automatically pair it with the vehicle?
No. Programming prepares the compatible replacement sensor. Vehicle recognition or relearning is a separate process and depends on the vehicle.
Can I clone the original BYD sensor IDs?
Where the original sensors can be read and the particular application supports cloning, readable IDs may be copied to compatible AUTOMATE replacement sensors.
What if the original sensor is completely dead?
If the original sensor cannot be read, directly cloning its ID may not be possible. Another supported procedure may be required depending on the vehicle.
Why does the kit include both a sensor programmer and an OBDII interface?
Because they perform different jobs. The Bluetooth Programmer works with compatible sensors, while the OBDII interface is for supported vehicle-side TPMS procedures.
Do I still need a tyre shop?
Yes, for the physical installation. TPMS sensors are mounted inside the wheel and require tyre-changing equipment for safe installation.
Can the programming tools be reused?
Yes. The Bluetooth Programmer and OBDII interface remain yours for future compatible TPMS servicing and AUTOMATE sensor work.
Will this kit work with every BYD?
TPMS systems vary between models, years, markets and sensor types. Always confirm compatibility and the correct procedure before programming or installing the sensors.
What if I’m unsure which procedure my BYD requires?
Provide MyTPMS Australia with the vehicle model, year and, where requested, VIN or original sensor details. We can help identify the appropriate compatible sensor and TPMS procedure before installation.
MYTPMS AUSTRALIA SUPPORT
Not Sure What Your BYD Requires?
Send us your BYD model, year and vehicle details and our TPMS team can help determine whether the compatible setup requires sensor programming, cloning, a vehicle-specific relearn or supported vehicle-side registration.
