TPMS (Tyre Pressure Monitoring System) Sensors for Tesla Model Y OE PART 1490701-01-C Bluetooth

$69.00

TPMS (Tyre Pressure Monitoring System) Sensors for Tesla Model X / Y / S & 3

Genuine TPMS (Tyre Pressure Monitoring System) Sensors for Tesla Model X / Y / S & 3

Tesla Models using Bluetooth TPMS:

  • Tesla Model 3 (Built Oct 2020-Present) – Bluetooth
  • Tesla Model Y (All Model Y, since introduction in Oct 2020-Present) – Bluetooth
  • Tesla Model X / X Plaid (Refreshed Model, Oct 2021-Present) – Bluetooth
  • Tesla Model S / S Plaid (Refreshed Model, Jun 2021-Present) – Bluetooth

 

Replace Part Number:

  • 1490701-01-B
  • 1490701-01-C
  • 1490701-00-B
  • 1472547G

20 in stock

3D View

Specifications

Car Make:

Tesla

Car Model:

Y

Reg. Year:

2021 - 2024

Genuine Manufacturer OE:

Continental

Sensor Brand:

Automate / Hamaton Bluetooth

Frequency:

Bluetooth (2.400~ 2483.5 MHz)

Relearn Type:

Automatic Trigger

OE:

1490701-01-C

Made:

Made in EEC with 100% Quality Control to match the Original Equipment

Quality & Price:

Best Quality for Low Price Assurance - Better than other listed on other market places

Instructions

Bluetooth-Enabled TPMS Sensors for Tesla Models

The Sensor you are purchasing is compatible with the following vehicle. If you need to purchase multiple sensors. Please buy more than one from the checkout page.

Vehicle: Tesla Model X / Y / S & 3 (These sensors are Bluetooth) Please confirm with us before purchasing

Genuine TPMS (Tyre Pressure Monitoring System) Sensors for Tesla Model X / Y / S & 3

Tesla Models using Bluetooth TPMS:

  • Tesla Model 3 (Built Oct 2020-Present) – Bluetooth
  • Tesla Model Y (All Model Y, since introduction in Oct 2020-Present) – Bluetooth
  • Tesla Model X / X Plaid (Refreshed Model, Oct 2021-Present) – Bluetooth
  • Tesla Model S / S Plaid (Refreshed Model, Jun 2021-Present) – Bluetooth

 

Replace Part Number:

  • 1490701-01-B
  • 1490701-01-C
  • 1490701-00-B
  • 1472547G

 

Fully Pre-Programmed and Bluetooth-Enabled TPMS Sensors for Tesla Models – FIT AND FORGET…

  • STEP 1 – ORDER
Place your order for Bluetooth-enabled TPMS sensors, and our listings categorize them based on Make, Model, and Year. Upon receiving your order, we carefully, individually, and uniquely pre-program each TPMS sensor. This is not an “off-the-shelf” operation. Every sensor is tailor-made and pre-programmed exclusively for your vehicle. We have dedicated significant time, development, and investment in this process to ensure it is straightforward for you.
  • STEP 2 – FIT
Fit your new Bluetooth-enabled TPMS Sensors – Any experienced Tyre Fitter will be able to carry out this service for you. There’s nothing else that you need to do, the sensors will arrive READY TO FIT. We’ve taken the stress out of this and completed the technical coding of the sensors for you.
  • STEP 3 – DRIVE
DO NOT ALLOW YOUR TYRE FITTER TO ATTEMPT TO RE-CODE!  Simply drive your vehicle, as all that is required to complete the operation is driving. It’s remarkably easy! It typically takes about 15 minutes on a steady drive for the new pre-programmed sensors to communicate with the vehicle’s systems. Voila! Your TPMS warning light will now be extinguished. Easy Peasy! While there is more to it, everything occurs behind the scenes while the vehicle is in motion. We’re happy to delve into the finer details, but it can be a bit long-winded!

Fully Pre-Programmed TPMS Sensors – FIT AND FORGET…

STEP 1 – ORDER

Order your TPMS sensors by selecting your car’s make, model, and year. After you place your order, we will carefully program each sensor specifically for your vehicle. This isn’t a one-size-fits-all process—each sensor is customized just for you. We’ve put a lot of effort into making this process easy and straightforward.

STEP 2 – FIT

Have your new TPMS sensors installed by any experienced tyre fitter. Our Automate sensors will automatically sync with the Control Module through a handshake between your vehicle and our sensors. However, some car manufacturers might require you to return to them for programming. Our Automate sensors eliminate that hassle. We’ll provide detailed instructions with your order, or you can find programming instructions for each vehicle make and model on our website.
Additionally, a programming cloning sensor tool is available as an add-on to make everything more convenient.

STEP 3 – DRIVE

Just drive your vehicle – To complete the operation, all that is needed is to drive the vehicle. Yes! It really is that easy! On average it takes around 15 minutes on a steady drive to allow the new pre-programmed sensors to communicate back to the vehicle’s systems. Voila! Your TPMS warning light will now be extinguished.

Additional information

Weight 0.1 kg
Dimensions 5 × 5 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    []